High Gain C Band Single LNBF with Cooling Fin

High Gain C Band Single LNBF with Cooling Fin

The LNB gets its power from the receiver or set-top box, using the same coaxial cable that carries signals from the LNB to the receiver.
Chat Now

Product Details

We intention to see quality disfigurement within the creation and supply the ideal support to domestic and overseas buyers wholeheartedly for KU Band LNBF, Ku Band Single LNB, Noise Cancelling Bluetooth Headphones. We have continuous innovation capabilities and economic scale production and manufacturing capabilities. We are looking forward to receiving your inquiry.

Model

GS-OCS13

Input Frequency

3.4-4.2GHz

L.O. Frequency

5.15GHz ± 1MHz

Stability

± 1MHz(-40 ℃ - +70 ℃)

Output Frequency

950-1750 MHz

Conversion Gain

65 dB (TYP)

L.O. Phase Noise

-55 dBc/Hz@1KHz

-85 dBc/Hz@10KHz

-105 dBc/Hz@100KHz

Gain Flatness

±0.5dB/36 MHz

Noise Figure

13°K

Image Rejection

50dB

Dc Supply Voltage

11-14.5 V (V), 15.5-22V (H)

Supply Current

<200mA

Operating Temperature

-40 ℃ ~ +70 ℃

IF Output Connector

“F” Type Female

Output Impedance

75 OHMS

Product Feature

This High Gain C Band LNB is actually the heart of the antenna. It is mainly a resonance chamber for receiving signals that are reflected by the antenna surface and then processed. Additional circuitry amplifies these electrical signals before they are routed into the cable and converts them to lower frequencies in order to reduce signal loss during cable transmission.


Product Description

This High Gain C Band LNB is a new kind of low noise down converter. Its function is to amplify and downconvert the satellite signal transmitted by the feed, and turn the Ku or C band signal into L band, via coaxial cable. Because the satellite signal is quite weak before reaching the antenna and the higher the frequency of coaxial cable transmission, the signal loss is larger, so the LNB is needed to amplify, and the signal-to-noise ratio cannot be deteriorated too much. Equipped with advanced process, our High Gain C Band LNB's workflow is to first amplify the satellite high-frequency signal, and then use the local oscillator circuit to convert the high-frequency signal to the intermediate frequency again to facilitate the transmission of coaxial cable and satellite. It is like a section of a pipe that converts the energy of a radio wave into an electrical signal via a polar probe. 


We open up the market with the spirit of 'bright sword', constantly cooperate with the market development trend and the growing social demand and are determined to reform and innovate, so as to make the High Gain C Band Single LNBF with Cooling Fin quality more perfect. Warmly welcome you to visit our factory sincerely. After several years of development and accumulation, our company has fully implemented institutionalized and standardized management.

Inquiry

You Might Also Like